​tig welding torch setting tungsten stick out length for fillet welds
Share this video:
https://www.youtube.com/watch?v=6x4CjwSPvMg
​
Get more tips – subscribe →

https://www.youtube.com/channel/UCYcAVANw1ybwe18GSirsHlw

In this video titled “tig welding torch setting tungsten stick out length for fillet welds” Stuart Graves explains the correct method to set the tungsten stick out length when performing a fillet weld. This technique is required when wilding with the Gas Tungsten Arc Welding (GTAW) process which is also known as the Tungsten Inert Gas (TIG) welding process.
The initial set up of “tig welding torch setting tungsten stick out length for fillet welds” looks at the following aspects:

Loosen back cap 0:16
Ceramic touching plate 0:27
Tighten back cap 0:28
Retract Tungsten 2mm 0:48

Make sure you click the subscribe button to receive alerts of new posts.

Tig weld torch, Setting tungsten stick out length, Fillet welds, GTAW, TIG, Tig welding beginners, Beginners welding, Tig beginners, Tig settings, Tig start up, Tig torch set up, Operator techniques, Tig welding process
Tungsten stick out length, Tungsten preparation, Tighten back cap, Angle of approach, Travel angle, DC negative, Thoriated tungsten, Zirconiated Tungsten, Gtaw initial set up, Midland metal fab, Midland metal fabrication, Perth welding training.

Instagram
the boiler shop.com.au

​Tig welding torch components and assembly
Share this video:
https://www.youtube.com/edit?o=U&video_id=FKNM3yUASlo
Get more tips – subscribe →
https://www.youtube.com/channel/UCYcAVANw1ybwe18GSirsHlw
In this video titled “tig welding torch components and assembly” Stuart Graves talks about the components that make a up the tig welding torch, Stuart also explains the correct method on how to assemble the tig torch ready for welding.
This correct method of tig welding torch components and assembly will assist you in setting up your tig welding torch for successful welding, this information is a great and valuable information for the beginner welder or the experienced tig welder who needs a reminder of the initial set up of the tig welding torch components and assembly.
The initial set up looks at the following aspects
How to put tig torch together 0:05
Tig torch components 0:10
Tig Collet body 0:20
Tig Ceramic gas cup 0:40
Tig Collet 0:55
Tig Back cap 1:10
Make sure you click the subscribe button to receive alerts of new posts.
 

Tig welding torch, Tig components and assembly, Tig setting up, Tig initial set up, Tig successful welding, Tig beginner welder, Experienced tig welder, Put tig torch together, Tig collet body, Tig ceramic gas cup, Tig collet, Tig back cap, Gtaw, Tig settings, Tig torch set up, Operator techniques, Tig welding process, Tungsten stick out length, Tungsten preparation, Tighten back cap, Midland metal fab, Midland metal fabrication, Perth welding training, 

​For more useful links and articles please click on the Tutorial Videos Link

​Regards
Glen Jones
Instagram
The Boiler Shop

tig welding Aluminium Butt weld initial set up
Share this video:
https://www.youtube.com/edit?o=U&video_id=Xxxn6WYWRGo
Get more tips – subscribe →
https://www.youtube.com/channel/UCYcAVANw1ybwe18GSirsHlw
In this video titled “ tig welding aluminium butt weld initial set up” Stuart Graves explains the correct tig torch set up and choose the appropriate tig welding operator techniques for performing an aluminium butt weld using the GTAW or tig welding process. The butt weld be done using  3mm aluminium plate.
The initial set up looks at the following aspects
Tungsten stick out length 0:10
Tungsten preparation 0:22
Tighten back cap 1:10
Angle of approach 1:20
Travel angle 1:30
Filler wire 1:55
Tungsten above surface 2:30
Required amperage 2:55
Back step welding 3:40
Make sure you click the subscribe button to receive alerts of new posts.
 
Tig welding beginners, Beginners welding, Tig beginners, Tig, Gtaw, Tig settings, Tig torch set up, Operator techniques, Tig welding process, Tungsten stick out length, Tungsten preparation, Tighten back cap, Angle of approach, Travel angle, Filler wire, Required amperage, Midland metal fab, Midland metal fabrication, Perth welding training, Back step welding, gtaw aluminium, Gtaw butt weld set up, Gtaw initial set up, Aluminium tig welding, Butt weld set up beginners, 

For more useful links and articles please click on the Tutorial Videos Link

​Regards
Glen Jones
Instagram
the boiler shop.com.au
​